For the best Paving Dublin company, call Active Paving.
Fireplace kits require regular maintenance to ensure high efficiency and safety. The hole at the top of the chimneys is covered by a chimney cap that prevents external matter from entering.
fireplace kit, fire place kit, fireplace kits
To find the best Paving Dublin company, click here for Active Paving.
Fireplace kits require regular maintenance to ensure high efficiency and safety. The hole at the top of the chimneys is covered by a chimney cap that prevents external matter from entering. This cap must be replaced in case it is damaged or missing.
For fireplace kits, an effective way to make sure that the outer mortar between the bricks is intact is by shining a flashlight down the chimney to look at the mortar inside. Crumbling mortar must be replaced. Metal chimneys should not consist of dented or rusted metal parts screws should not be missing.
It is a good idea to clean chimneys at frequent intervals as there may be deposits of creosote that can cause a dangerous chimney fire. Creosote is a hard and crust like produced during the incomplete combustion of wood. Soot too is a flammable deposit that needs to be removed if deposited on the chimney walls. If this deposit reaches a depth of about 1/8 inch, the chimney must be cleaned to remove these deposits.
It should always be kept in mind that fireplace kits should not be used as furnaces. Fireplaces should be used for short duration fire (approximately five hours). Fireplace coals can remain hot enough to start a fire up to three days after burning. Thus vacuum should never be used to clean up the ashes as there is a possibility that live coals may remain in those ashes. If there is smoke in the house even after eliminating the chimney debris, make sure the damper is open. If there is a large amount of smoke coming out of the chimney, it indicates that the wood is not burning completely. These are just some of the safety guidelines that a home owner should practice when it comes to fireplace kits.